AVer SecureCenter - Manual (Page 35)

30
(3) Miscellaneous
 Date Format : Select from different date formats
1. Click Setup.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click System.
4. In the Date Format drop down list, click and select the style.
5. In the System Setting dialog box, click OK to accept the new setting and Cancel to exit
without saving the new setting.

Display position: SecureCenter system supports up to 4 monitors, users are allowed to
customize the display position that to decide the Center, Emap, Monitor, or Playback to be
displayed on which monitor screen. Click Detail to select the display screen setting. The
new screen display setting will be effect at next time login.
 System Controller – To configure the parameters that is for communicating with the
System Controller (an optional accessory). Also please refer to user manual of the
System Controller. Click Setting to configure system controller.
i
The Model of System Controller must match on the System Controller site.
 USB Connection: SecureCenter can connect with System Controller through the
USB port. Follow the below description to enable the connection between
SecureCenter server and System Controller.
 Enable – Mark the check box to enable the System Controller function.
 Model – Select System Controller Pro as the Model.