AVer SecureCenter - Manual (Page 39)

34
4.2 NVR Setting
Display the list of all NVR servers. User may add up to 16 NVR servers, delete and modify the NVR
setting.
1. Click Setup from SecureCenter main interface.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click (NVR Setting).
4. In the NVR Setup section, click Add to insert, Delete to remove and Edit to modify NVR server
setting.
5. To continue adding a NVR, in the text box, enter the name, IP/Domain, Login User, Password,
Confirm Password of the remote NVR server.
6. If necessary, fill up the contact information to let the personnel in the SecureCenter side know
whom to get in touch with when an event has occurred.
7. Select the Video Quality for video display on the SecureCenter system monitor screen. The
default value is Auto.
8. Enter the remote accessing port of NVR server in Remote Control port column. The default
value is 5555.
9. Set the Storage Path for saving the recorded video data of the selected cameras on the Monitor
screen.
10. Set the max video recorded storage capacity of this NVR server on the SecureCenter system
server. Enter the value in Quota.
11. In the NVR Settings dialog box, click OK to accept the new setting and Cancel to exit without
saving the new setting. The SecureCenter system will connect to NVR server. If the connecting
time takes too long, user can click Disconnect button to cancel the connect action.