AVer SecureCenter User Manual
Page 43
38
Sequence: Set the selected channel to automatically switch to display all camera channels
in cycle.
Matrix: set the selected channel to receive and display the alarm event from selected NVR
servers. Click Setup to select the NVR servers. Enable the Retrieve time to set a period
time (0 ~ 255 sec) for alarm event to display. If the retrieve time does
n’t enable, the alarm
event will display on screen until next alarm event come in.
i
On the NVR site, user need to enable and configure the matrix to send to
SecureCenter (please refer to Alarm Setting of NVR
user’s manual).
Image: To insert an image on selected channel. The image supports *.bmp and *.jpg format.
Click Setup and browse where the image located is.
18. Click OK to save the setup. To exit without saving, click Cancel.
19. To delete the monitor set, select the monitor set in Monitor Select window and click Delete
button.
20. To modify the monitor set, select the monitor set in Monitor Select window and click Edit button.
21. To use the Monitor function, please see