AVer SecureCenter - Manual (Page 48)

43
4.6 E-MAP Setup
Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map
on another map. User also may add the NVR icons on the map.
4.6.1 To Set Up the E-Map
1. Click Setup.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click (E-Map).
4. The E-Map interface will show up in assigned monitor if user is using multiple monitors for the
SecureCenter system. If user is using single monitor for the SecureCenter application, the E-Map
interface will show up in front of the SecureCenter application interface. Press Esc or click
Center button to switch back to SecureCenter application interface or press F3 to switch to E-
Map interface again.
5. On the E-Map interface:
- (1) Map List: list all E-Map and all NVR servers that have been added on the E-Map.
- (2) Group List: User can create the group to group NVR servers for easy management.
Click to add new group. Drag the NVR server from Map List window into the group. To
delete the group, click . Double-click on the NVR server will call out the NVR Watch
window(see also Chapter 4.6.4 )
- (3) : go back to previous layer of map
- (4) Show the current name and layer of map
- (5) : Load a map to replace the current map
- (6) : Add a new map. The new map is added on the current map as a next level. (see
also Chapter 4.6.2 )
- (7) & : Edit and delete map.