AVer SecureCenter - Manual (Page 36)

31
 Upgrade – To update the firmware of the System Controller. Click Upgrade button
and click Select File button. And then, select the firmware file and click OK. The
upgrade process will start. The upgrade firmware may have more than one file.
Therefore, click OK and locate the firmware file to upgrade another file. When the
upgrade process is done, click Finish to complete.
 RS485 Connection: Connecting SecureCenter with System Controller through RS485
port on the System Controller. Follow the below description to enable the connection
between SecureCenter server and System Controller.
 Enable – Mark the check box to enable the System Controller function.
 Model – Select System Controller Pro 485 as the Model.
 Port – Select the com port that is connected with the System Controller.
 Server ID – Set an ID for SecureCenter server (0~99). This ID is a SecureCenter
server ID for System Controller to select.
 Block Windows OS hotkey: Deactivate the [Ctrl-Alt-Del ] and [ Windows ] keyboard key
functions.

Auto Login when OS start: Execute the SecureCenter when the operating system is
started.

Default User: Automatically log in to the selected default user when the SecureCenter is
started.

Auto Backup: The backup will automatically execute when the backup setting has set.