AVer SecureCenter - Manual (Page 65)

60
5.2 Using the Local Playback Application
Name Function
(1) Exit Close the Player.
(2) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second (See also
Chapter 5.5 ).
(3) Intelligent Search Search the changes in the motion detector frame (See also Chapter 5.6 ).
(4) Event Search Search from the recorded activities that take place in the system (i.e.,
Sensor, Motion, Video Loss) (See also
Chapter 5.7 ).
(5) Find Next Search for the next event or changes in the motion detector frame. You
can use this when you are using Intelligent Search or Event Search only.
(6) Camera ID Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view other
camera.
(7) Hour Buttons Select and click to playback the recorded video file on the specific time
frame.
i
The numbers from 00 to 23 represent the time in 24-hour clock. The blue colored
indicates that there is a recorded video file on that period of time. While the red colored
column indicates on where to start playing the recorded video file.
(8) Progress bar Show the progress of the file being played. You may move the bar to seek
at any location of the track.
(9) Playback Control
Buttons
(Begin): Move to the beginning of the recorded video file.
(Previous): Go back to the previous frame.
(Slower): Play the recorded video file at the speed of 1/2x, 1/4x, or
1/8x, 1/16x, or 1/32x.