Catler GR 8030 - Manual (Page 12)

12
ASSEMBLING YOUR CATLER PRODUCT
PREPARING THE GRILL FOR USE
1. Remove and safely discard any packing
material and promotional labels from the
grill
2. Wipe the cooking plates and drip tray
with a soft damp sponge. Dry thoroughly.
3. Ensure the drip tray is correctly inserted
into the grill.
4. Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE
The grill features 2 × PLATE RELEASE.
These allow you to independently
remove the top and bottom cooking
plates for easy cleaning, or to
interchange plate positions.
To use the PLATE RELEASE: Always
ensure the grill is completely cool.
Use the handle to open the top plate
to a 90 degree position. Use the ‘Plate
Release’ on the front, right side of the
top plate to remove the top cooking
plate, and the ‘Plate Release’ on the left
side of the control panel to remove the
bottom cooking plate. Once released,
gently slide the plates off the grill.
NOTE
If the cooking plates are incorrectly
inserted, the LCD screen will display
INSERT PLATE. Use the 2 × PLATE
RELEASE to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing and
removing the cooking plates.
5. Place the grill on a fl at, dry surface.
Ensure there is a minimum distance
of 10cm of space on both sides of the
appliance.
6. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
7. The grill alert will sound and the LCD
screen will display OFF and the default ‘0’
zero time.
8. The grill is now ready for the preheating
cycle.
NOTE
When the grill is turned on and
heating for the fi rst time, it may emit
a fi ne smoke haze. This is due to the
protective substances on the heating
elements. It is safe and not detrimental
to the performance of the grill.
ASSEMBLING YOUR CATLER PRODUCT