Catler GR 8030 - Manual (Page 18)

18
OPERATING YOUR CATLER PRODUCT
USE AS A CONTACT GRILL
OR SANDWICH PRESS
1. Ensure the drip tray is correctly inserted
into the grill.
2. Ensure the cooking plates are correctly
inserted and securely locked into
position.
NOTE
If the cooking plates are incorrectly
inserted, the LCD screen will display
INSERT PLATE. Use the 2 × PLATE
RELEASE to remove the plates then
re-insert so they securely lock into
position. Always ensure the grill is
completely cool before releasing and
removing the cooking plates. Refer to
page 10 for more information on using
the PLATE RELEASE.
3. Place the grill on a fl at, dry surface.
Ensure there is a minimum distance
of 10cm of space on both sides of the
appliance.
4. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
5. The grill alert will sound and the LCD
screen will display OFF and the default ‘0’
zero time.
6. To preheat the grill:
a) Ensure the top plate of the grill is in the
closed, ‘OPEN’ position. This will ensure
faster, more eff cient preheating
b) Turn the Temperature dial to adjust the
temperature in 5°C/10°F increments.
Rotate the dial to ‘SEAR’ (210°C-230°C)
for fast preheating, ‘PANINI’(Sandwich)
(180°C-205°C), ‘LOW’ (160°C-175°C) or
select an alternative temperature. The
grill will start to heat and the LCd screen
will illuminate orange and display the
selected temperature, ‘HEATING’ and the
default ‘0’ zero time.
c) Allow the grill to preheat.