Catler GR 8030 - Manual (Page 21)

21
OPERATING YOUR CATLER PRODUCT
12. The grill features an optional countdown
timer which monitors the time elapsed
during cooking. To activate the count-
down timer:
a) Ensure the grill has completely
preheated, the LCD screen no longer
displays HEATING and food has been
placed on the bottom cooking plate.
a) Turn the Timer dial to adjust the time in
one minute increments up to 30 minutes.
Rotate the dial clockwise to increase the
time, or counter-clockwise to reduce
the time. The LCD screen will display the
selected time.
a) Press the centre button of the timer dial
once to activate the setting. The LCD
screen will display a count-down indicator
and the time will begin to count down.
NOTE
The count-down timer can be stopped
or paused at any time by pressing the
centre button of the timer dial a second
time. The LCD screen will no longer
display the count-down indicator.
However, the grill will not turn off , it
will remain heating.
To reset or clear the timer either:
- Rotate the Timer Dial clockwise
to increase the time, or
counterclockwise to reduce the time.
Or,
- Press the centre button of the
timer dial and hold for 3 seconds
until the time on the LCD screen
displays ‘0’ zero. Rotate the timer dial
clockwise to increase the time, or
counterclockwise to reduce the time.
13. Once the selected time has elapsed, the
grill alert will sound and the default ‘0’
zero time will be displayed. However, the
grill will not turn off . It will remain heating,
maintaining the selected temperature,
ready for the next cooking cycle.
NOTE
The cooking and heating cycle can be
stopped at any time by turning the
temperature dial to the OFF position.
The LCD screen will cease to illuminate,
displaying OFF and the default ‘0’ zero
time. Allow the grill to cool completely
and disconnect from the wall outlet.
NOTE
The grill features a 1-Hour auto shutoff
feature. This ensures the grill is not
accidentally left on for an extended
period of time. If the temperature or
timer dials are not adjusted within
1 hour, the auto shut-off feature will
automatically stop heating the cooking
plates. The LCD screen will display OFF
for 5 minutes then cease to illuminate.
However, the default display OFF
and ‘0’ zero time will still be visible.
To re-activate the grill, adjust the
temperature or timer dials.
14. When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE
Never use metal or sharp utensils as
these can cause damage to the non-
stick coating of the cooking plates.
WARNING:
Fully unwind the power cord from the
cord storage before use.