Catler KM 8011 - Manual (Page 23)

23
CARE, CLEANING & STORAGE
MOTOR HEAD AND MIXER BASE
Do not wash or immerse the mixer motor
head or mixer base in water. Do not allow
water or other liquids to enter the gear
system, as this may result in damage.
Wipe clean with a soft, damp cloth then dry
thoroughly. Wipe any excess food particles
from the power cord.
CLEANING AGENTS
Do not use abrasive scouring pads or
cleaners on the mixing bowl, fl at beater,
dough hook or whisk, as they may scratch
the surface. Use only warm soapy water with
a soft cloth.
Also do not soak attachments for extended
periods of time, for example several hours or
overnight, as this may damage the fi nish.
BOWL AND ATTACHMENTS
Wash the bowl and attachments (beater,
scraper beater, whisk and dough hook) with
warm soapy water and a soft cloth or a soft
bristled brush. Rinse and dry thoroughly.
Avoid abrasive scouring pads or cleaners, as
they may damage the surfaces..
DISHWASHER
The bowl and attachments (beater, scraper
beater, whisk and dough hook) can also be
washed in the dishwasher on a standard
wash cycle. Place scraper beater on the top
shelf only.
STORAGE
Store your mixer on the kitchen bench, or
upright in an accessible cupboard.
Always ensure the speed control dial is in the
OFF position, the mixer is off at the wall, and
the power cord is unplugged.
Store the mixing bowl locked into the bowl
recess in the mixer base.
Place the attachments inside the mixing
bowl and lower the mixer head into the
horizontal (closed) position.
Do not take off the motor head for any
purpose.
CARE, CLEANING & STORAGE