CellarPro AIR HANDLER 6500 HORIZONTAL, 7090 - Manual (Page 30)

30
Energy Saver Button
To activate and deactivate the “Energy
Saver” mode, press the “Energy Saver”
button.
The “Energy Saver” indicator light will turn
on when the cooling unit is in “Energy
Saver” mode.
In “Energy Saver” mode, the Minimum Set
Point increases 4°F and the Temperature
Differential is unchanged.
Quick Chill Button
To activate the “Quick Chill” mode, press
the “Up” / “Quick Chill” button for three
seconds.
To deactivate “Quick Chill”, press “Quick
Chill” button for three seconds again.
The “Quick Chill” indicator light will turn on
when the cooling unit is in “Quick Chill”
mode.
In the “Quick Chill” mode, the cooling unit
will run continuously for 6 hours (or until
the intake temperature registers 50°F).
This mode is useful after loading “warm”
bottles in a cellar.
Maintenance
The condenser coils on the Condensing unit will collect dust, dirt and lint over time. If
the condenser coils become clogged, the cooling unit will not have proper airflow and
its performance and longevity will be compromised. The condenser coils themselves
also can be cleaned with a vacuum cleaner – ideally with a brush attachment to
loosen dust caught between the fins.