BoonDocker POLARIS: 2011-14 PRO RMK 800 Intercooled - Manual (Page 12)

Revised 10/22/2014 Page 12 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
61.Drill the three 3/16 holes and rivet from the
inside as shown, Remove the foam from around
stock air intake Install the frog skin over the
stock air hole on plenum. 62. Install the silicone hose to turbo with two
clamps, leave loose install silicone onto adapter
on hood only one clamps will be used here for
easy hood removal.. Adjust for fit and tighten.
64.Reinstall-Fuel Tank, seat and Hood . Attach
the control box using supplied Velcro Route the
Boost pressure line from the control box to the
push to connect fitting on the Air box or Cooler.
65.Install the Clutch Kit , Primary spring, and
clutch weights, Install Secondary spring and
Helix. Recommended helix start: 40-46-36, if
less RPM desired 42-48-36 Faster up shift.