Dvd operations, English, Loading a disc – Clarion VXZ758R User Manual

Page 22: Backup eject function, Caution, Switching the pty display language

Advertising
background image

22

VXZ758R

280-8178-00

English

DVD Operations

Loading a disc

Insert the disc into the DVD/CD insertion slot
with its labeled side facing up, then the disc will
start playing.

For 5-inch

For 3-inch

(12 cm) disc

(8 cm) single disc

Notes:
• Never insert foreign objects into the DVD/CD

SLOT.

• If the disc is not inserted easily, there may be

another disc in the mechanism or the unit may
require service.

Loading 8 cm compact discs

∗ No adapter is required to play an 8 cm CD.

∗ Insert the 8 cm CD into the center of the

insertion slot.

Backup Eject function

Pressing the [

Q] button ejects the disc even if

the power to the unit was not turned on.

Press the [

Q] button, then the disc will be

ejected.

Note:
• If the ejected disc is left as it is, it will be reloaded

after 15 seconds. However, single CDs will not be
reloaded, so make sure to remove them.

CAUTION

• Do not try to put your hand or fingers in the

disc insertion slot. Also never insert foreign
objects into the slot.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD
label, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.

RDS Operations

Switching the PTY display
language

You can select one of 4 languages (English, Ger-
man, Swedish or French) for the PTY displayed
in the display.
∗ The factory default setting is “ENGLISH”.
1. Press the [ADJ] button to switch to the adjust

mode.

2. Press the [

a]/[d] button to select “LAN-

GUAGE”.

3. Turn the [ROTARY] knob to select the desired

language.

4. Press the [ADJ] button to return to the previ-

ous mode.

Volume setting of TA,
emergency broadcast
(ALARM) and PTY

The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the [RO-
TARY
] knob to set the volume to the desired level (0
to 33).
∗ When the TA, ALARM or PTY interrupt ends, the

volume returns to the level it had before the inter-
rupt.

+VXZ758R_01-09-Eng.p65

05.3.1, 6:02 PM

22

Advertising