Clarion VXZ758R - Manual (Page 46)

46
VXZ758R
280-8178-00
English
● RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
● LEFT:
Telephone calls can be heard on the front left
speaker connected to this unit.
4. Press the [ADJ] button to return to the previ-
ous mode.
Cellular phone interrupt
setting
If you connect this unit and your cellular phone
with a separately sold unit (TEL-002), you can
listen to your telephone calls on your car speak-
ers.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ a]/[d] button to select
“TEL-SWITCH”.
3. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
OFF ➜ ON ➜ MUTE ➜ OFF...
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is “ON” to receive the telephone audio
through the system.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car speak-
ers, you can adjust the volume by turning the
[ROTARY] knob.
● MUTE:
The sound from this unit is muted during tele-
phone calls.
4. Press the [ADJ] button to return to the previ-
ous mode.
Performing a system check
This function verifies the devices hooked up
through CeNET.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ a]/[d] button to select “SYSTM
CHK E E E E E”.
Common Operations
Selecting AUX/TEL
You can listen to sounds and music from external
devices or your telephone calls from the speak-
ers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ a]/[d] button to select “AUX/
TEL”.
3. Turn the [ROTARY] knob to select “AUX” or
“TEL”.
● AUX :
AUX/TEL input cable is for external Audio in-
put.
● TEL :
AUX/TEL input cable is for cellular phone au-
dio input.
4. Press the [ADJ] button to return to the previ-
ous mode.
Adjusting the auxiliary input
sensitivity
Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ a]/[d] button to select
“AUX SENSE”.
3. Turn the [ROTARY] knob to select from
“LOW”, “MID” or “HIGH”.
4. Press the [ADJ] button to return to the previ-
ous mode.
Setting the car speaker output
for the cellular phone
(Optional TEL-002)
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to “ON”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [ a]/[d] button to select “TEL-
SP”.
3. Turn the [ROTARY] knob to select “RIGHT” or
“LEFT”.
+VXZ758R_01-09-Eng.p65 05.3.1, 6:04 PM 46