Clarion VXZ758R - Manual (Page 32)

32
VXZ758R
280-8178-00
English
● File extensions
1. Always add a file extension “.MP3” or “.WMA”
to MP3 or WMA file by using single byte let-
ters. If you add a file extension other than
specified or forget to add the file extension ,
the file cannot be played.
2. Files without MP3/WMA data will be skipped
and cannot be played.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc or
CD-RW disc, please select “ISO9660 level 1,
2 or JOLIET or Romeo” as the writing soft-
ware format. Normal play may not be possible
if the disc is recorded on another format.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 62 single byte ASCII
characters (including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8 hierar-
chical levels will be impossible.
● Number of files or folders
1. Up to 999 files/255 folders can be played. But
if there are 999 files in one folder, other
folders cannot be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
4. In case of a track recorded at VBR (variable
bit rate), the display for the play time of the
track may be slightly different from the actual
play time.
Also, the recommended value of VBR ranges
from 64 kbps to 320 kbps.
5. Depending on the damage conditions of a file,
it may occur that the file is not played and the
next file is played instead.
Also, if the damage is in a severe condition,
play stops showing the “DISC ERROR”
display.
Listening to an MP3/WMA
After disc selection, the play mode is
automatically engaged.
• Example showing WMA/ID3 Tag display.
Note:
• This unit supports only WMA/ID3 Tag information
in ASCII characters. Also, some character data
may not be reproduced properly on the monitor.
Top function
The top function resets the MP3/WMA player to
the first track of a folder being played. Press the
[BND] button to play the first track (track No. 1)
of a folder.
Pausing playback
Press the [ ] button during playback.
∗ Playback pauses.
■ To resume playback
• Press the [ ] button again, and
playback resumes.
+VXZ758R_01-09-Eng.p65 05.3.1, 6:03 PM 32