Clarion VXZ758R - Manual (Page 30)

30
VXZ758R
280-8178-00
English
Listening to a CD
∗ This unit is a CD TEXT compatible model.
This unit supports the display of the DISC TITLE,
TRACK TITLE and ARTIST of the CD TEXT.
After inserting a disc, the play mode is
automatically engaged.
• Example showing CD TEXT display.
Note:
• This unit supports only CD TEXT in
alphanumerics. Also, some character data may not
be reproduced properly on the monitor.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
Pausing playback
Press the [ ] button during playback.
∗ Playback pauses.
■ To resume playback
• Press the [ ] button again, and
playback resumes.
Displaying CD titles
This unit can display title data for CD-text disc
and user titles input with this unit.
Each time you press the [TITLE] button, the title
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
Skipping a track (searching)
Press the TRACK up [ d]/ TRACK down [a]
buttons.
∗ Tracks are skipped, as many as the times
the button is pressed, and playback starts.
• Press the [ d] button, and playback starts
from the beginning of the next track.
• Press the [ a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
Fast-forward and fast-rewind
Press and hold the Fast-forward [ d] button or
Fast-rewind [ a] button during playback.
∗ Press and hold the button, and the
playback speed becomes 4-time faster first
and then 8-time faster 3 seconds later.
Release the button, and the normal speed
is restored.
Searching with a track
number
This operation allows searching using the track
numbers recorded on the CDs.
∗ This function can only be used from the remote
control unit.
1. Press the [SEARCH MODE] button during
playback.
2. Input the number of the track that you want to
play back with the ten-key buttons (0 to 9).
• To input the track number “12”, press “1” of
the ten-key buttons and then “2”.
3. Press the [ENT] button on the remote control
unit.
∗ Playback starts from the track of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the following message appears to
invalidate the input.
Press “1”.
Press “2”.
+VXZ758R_01-09-Eng.p65 05.3.2, 11:55 AM 30