Cisco 340 - Manual (Page 14)

5-14
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Advanced Infrastructure Parameters
Setting Advanced Infrastructure Parameters
Note You can set advanced infrastructure parameters only if your client adapter has been set to
operate in an infrastructure network. See the Network Type parameter in
Table 5-2 .
The Advanced (Infrastructure) screen (see Figure 5-3 ) enables you to set parameters that control how the
client adapter operates within an infrastructure network. To access this screen, choose the Advanced
(Infrastructure) tab from the Properties screens.
Figure 5-3 Advanced (Infrastructure) Screen