Cisco 340 - Manual (Page 40)

5-40
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Step 5 Perform one of the following:
• If you selected Use Temporary User Name and Password in Step 4 , choose one of the following
options:
– Use Windows Logon User Name and Password—Causes your Windows username and
password to also serve as your LEAP username and password, giving you only one set of
credentials to remember. After you log in, the LEAP authentication process begins
automatically. This option is the default setting.
– Automatically Prompt for User Name and Password—Requires you to enter a separate
LEAP username and password (which are registered with the RADIUS server) in addition to
your regular Windows login in order to start the LEAP authentication process.
– Manually Prompt for User Name and Password—Requires you to manually invoke the LEAP
authentication process as needed using the Manual Login option from the Commands
drop-down menu. You are not prompted to enter a LEAP username and password during the
Windows login. This option might be used to support a software token one-time password
system or other systems that require additional software that is not available at login.
• If you selected Use Saved User Name and Password in Step 4 , follow these steps:
a. Enter a username and password in the appropriate fields.
Note Usernames are limited to 64 ASCII characters in the software included in Install Wizard
version 1.3 or later and to 32 ASCII characters in previous Install Wizard versions.
Passwords are limited to 32 ASCII characters. However, if a domain name is entered in
the Domain field, the sum of the username and domain name is limited to 63 ASCII
characters in the software included in Install Wizard version 1.3 or later and to 31
characters in previous Install Wizard versions.
b. Re-enter the password in the Confirm Password field.
c. If you wish to specify a domain name that will be passed to the RADIUS server along with your
username, enter it in the Domain field.
Note If you are using the software included in Install Wizard version 1.3 or later, you can
include the domain name in the User Name field as follows: username@domain.com
(provided that your RADIUS server supports this format). A maximum of 64 ASCII
characters can be entered for the username@domain.com string. If you include the
domain name in the User Name field, the Domain field becomes disabled.
Step 6 If you work in an environment with multiple domains and, therefore, want your Windows login domain
to be passed to the RADIUS server along with your username, check the Include Windows Logon
Domain with User Name check box. The default setting is checked.
Note If you selected to use a saved username and password but do not check the Include Windows
Logon Domain with User Name check box, the Domain field becomes unavailable, and a
domain name is not passed to the RADIUS server.
Step 7 If you want to force the client adapter to disassociate after you log off so that another user cannot gain
access to the wireless network using your credentials, check the No Network Connection Unless User
Is Logged In check box. The default setting is checked.