Cisco 340 User Manual
Page 53
5-53
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Figure 5-12 Wireless Network Properties Screen (Association Tab)
Step 4
Perform one of the following:
•
If you selected an SSID from the list of available networks, make sure the SSID appears in the
Network name (SSID) field.
•
If you clicked Add, enter the case-sensitive SSID of your profile in the Network name (SSID) field.
Step 5
Choose WPA from the Network Authentication drop-down list. This option enables your client adapter
to associate to access points using WPA.
Step 6
Choose TKIP from the Data encryption drop-down list.
Step 7
Go to the
“Enabling EAP Authentication in Windows”
section below to enable EAP authentication for
this profile.