Overwriting an existing static wep key, Disabling static wep – Cisco 340 User Manual
Page 37
![background image](/manuals/63658/37/background.png)
5-37
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Network Security Parameters
Overwriting an Existing Static WEP Key
Follow these steps to overwrite an existing static WEP key.
Note
You can overwrite existing WEP keys, but you cannot edit or delete them.
Step 1
Click the Static WEP Keys button on the Network Security screen. The Static WEP Keys screen appears
(see
).
Step 2
Look at the current WEP key settings in the middle of the screen. A check mark appears in the Already
Set? box for all existing static WEP keys.
Note
For security reasons, the codes for existing static WEP keys do not appear on the screen.
Step 3
Decide which existing static WEP key you want to overwrite.
Step 4
Click within the blank field of that key.
Step 5
Enter a new key, following the guidelines outlined in
of the
“Entering a New Static WEP Key”
.
Step 6
Make sure the Transmit Key button to the left of your key is selected, if you want this key to be used to
transmit packets.
Step 7
Click OK to exit the Static WEP Keys screen and return to the Network Security screen.
Step 8
Click OK to return to the Profile Manager screen; then click OK or Apply to save your changes.
Disabling Static WEP
If you ever need to disable static WEP for a particular profile, choose None under Data Encryption on
the Network Security screen, click OK, and click OK or Apply on the Profile Manager screen.
Note
Choosing LEAP or EAP-FAST under Network Authentication on the Network Security screen disables
static WEP automatically.