Hybrid Racing HR 06+ 8th Gen Civic Si Shifter Cables - Manual (Page 11)

11
Install Guide
STEP 14:
We will start from the underside of the
car by feeding them up to the trans-
mission side first then into the car on
the shifter side. Once you have the ca-
bles staying there we can now move
back under the hood. First slide the
end links on the shifter arm assembly
and snap on the (2) cotter pins (Fig
14A). Next, pull back on the cable and
slide the cable bushing into place.
Once the bushings are in place, slide
the (2) “c”-shaped linkage clip back on
like the OEM ones as illustrated (Fig
14B).
STEP 15:
Moving back into the interior, pull the
cables up to the shifter making sure
that you have them going to the cor-
rect side. NOTE: One of the endlinks
has a yellow dot on it, make sure it
goes on the rear of the shifter and
matches the one shown in Fig 15.
Once you have them on the correct
side, push the end links on to the shift-
er until the wire clips snap on. Make
sure that cables fit straight on as illus-
trated in Fig 15, if they do no not you
may have to flip the end link on the
transmission side or they can be ad-
justed (Explained in following step)
Fig 14A
Fig 15
Fig 14B