Fig 17b fig 17a, Install guide – Hybrid Racing HR 06+ 8th Gen Civic Si Shifter Cables User Manual
Page 12
12
Install Guide
IMPORTANT
Make sure that you can go through all 6 gears and reverse. If you hear a click from
the transmission when moving the shift knob left to right and you cannot shift through
the gears you have the cables backwards on the shifter. Also, if you cannot feel the
distinct notch for the reverse gate you may have forgotten or incorrectly installed the
washer in the shifter arm assembly on the smaller spring. If you do not see either one
of these problems you may put the interior back together at this time if you wish.
STEP 17:
Push the bushings into the correct place on the back side of the shifter and slide on
the “c”-shaped linkage clips provided just as you did with the transmission side. When
completed yours should look like the ones illustrated in Fig 17A/17B.
Fig 17B
Fig 17A
STEP 16:
This is an optional step if the orienta-
tion of the endlink on the shifter side
is not adequate. To adjust it, loosen
the nut at the base of the endlink, ro-
tate to desired orientation, and re-
tighten the nut.