Hybrid Racing HR 06+ 8th Gen Civic Si Shifter Cables - Manual (Page 7)

7
OEM Cable Removal
STEP 8:
The shifter cables should now be unattached completely from the shifter and trans-
mission, and now you should be able to pull the cables completely off the car from
the bottom. Be careful pulling them out as the bushings tend to get hung up. Once
they are out we can now begin the installation of the Hybrid Racing shifter cables.
Install Guide
STEP 9:
First we will start with installing the new
transmission selector lever springs. Before
doing so you MUST make sure the car is
in neutral before doing anything else.
Once you are completely sure the car is in
neutral, we will remove the shifter arm as-
sembly from the transmission. Start by un-
plugging the reverse light switch plug (Fig
9A). With a 10mm socket, remove the (4)
M6 bolts as illustrated in Fig 9B(keep track
of which bolts came from where because
they are different lengths). Next, you will
need an 8mm allen key to remove the low-
er retaining interlock bolt as illustrated(Fig
9C). Now you must pull straight up on the
whole assembly to pull it out (you may
need a flathead screwdriver to pry on it
and get it started).
Fig 9A
Fig 9C
Fig 9B