Kontron VMP2 - Manual (Page 18)

Preface VMP2
ID 24855, Rev. 02 Page 0 - 18 © 2002 PEP Modular Computers GmbH
General Instructions on Usage
• In order to maintain PEP’s product warranty, this product must not be altered or modified
in any way. Changes or modifications to the device, which are not explicitly approved by
PEP Modular Computers and described in this manual or received from PEP Technical
Support as a special handling instruction, will void your warranty.
• This device should only be installed in or connected to systems that fulfill all necessary
technical and specific environmental requirements. This applies also to the operational
temperature range of the specific board version, which must not be exceeded. If batter-
ies are present their temperature restrictions must be taken into account.
• In performing all necessary installation and application operations, please follow only
the instructions supplied by the present manual.
• Keep all the original packaging material for future storage or warranty shipments. If it is
necessary to store or ship the board please re-pack it as nearly as possible in the man-
ner in which it was delivered.
• Special care is necessary when handling or unpacking the product. Please, consult the
special handling and unpacking instruction on the previous page of this manual.