Kontron VMP2 - Manual (Page 89)

VMP2 NetBootLoader
ID 24855, Rev. 02 © 2002 PEP Modular Computers GmbH Page 5 - 15
SYNTAX: cd <new-path>
where:
cd command
<new-path> parameter: string
new directory path
DESCRIPTION: If an ftp server session has been established with the “login”
command, the command “cd” is used to change the current ftp server
directory.
The argument “<new-path>” may be an absolute or relative path. The
format depends on what the server accepts. For example, UNIX
hosts require that the directory names must be entered exactly in the
same case.
C H E C K
FUNCTION: Verify validity of application programmed to FLASH
SYNTAX: check
DESCRIPTION: When an application is programmed to FLASH, a CRC is performed
and the results are stored in FLASH along with the application. The
“check” command is used to verify that the current application image
in FLASH is valid.
USAGE: Veriy valid application is stored in FLASH
COMMAND / RESPONSE:
check
Check userimage CRC: ok
C D