Kontron VMP2 - Manual (Page 95)

VMP2 NetBootLoader
ID 24855, Rev. 02 © 2002 PEP Modular Computers GmbH Page 5 - 21
USAGE: Program FLASH from data buffer to offset 0xF4240 and retain adjacent
FLASH contents
COMMAND / RESPONSE (none):
lf -o=f4240 -k
L O G I N
FUNCTION: Initiate ftp server session
SYNTAX: login <ip-of-host> <username> [<password>]
where:
login command
<ip-of-host> parameter: value: numerical string
IP address of host: nnn.nnn.nnn.nnn
<username> parameter: value: string
ftp server “username”
<password> parameter: value: string
user’s password
DESCRIPTION: The command “login” is used to establish an ftp server session. The
“<ip-of-host>” must be specified as four numbers separated by single
dots. The “<password>” parameter is not necessary if the server does
not request one.
USAGE: Initiate ftp server session
COMMAND / RESPONSE:
login 192.168.47.12 johndoe mypassword
(Response is dependent on the server accessed)
L O G O U T
FUNCTION: Terminate telnet session with NetBootLoader
L F