Kontron VMP2 - Manual (Page 59)

VMP2 Configuration
ID 24855, Rev. 02 Page 4 - 7 © 2002 PEP Modular Computers GmbH
4.3 Board Address Map
4.3.1 Address Map Overview
The following figures illustrate the address mapping of the VMP2. Where the first figure
describes the overall map, the second figure provides a more detailed map of the upper-
most address area. The upper area address map depends on the configuration of the
VMP2 memory expansion sockets and the requirements of the application.
Figure 4-1: VMP2 Address Map
BANK 0 BANK 0 0xFFFF FFFF
0xFFF0 0100
Reset Entry J1 IN J1 OUT
0xFFE0 0000 VMP2 UPPER AREA
Reserved
0xFF00 0000
PCI Interrupt Ack 0xFEF0 0000
Configuration DATA 0xFEE0 0000
Configuration Address
0xFEC0 0000 0xFEC0 0000
0x8000 0000
PCI
0x7C00 0000
Reserved
0x4000 0000
Reserved
0x0000 0000
DRAM