Kontron AM4022 uEFI BIOS - Manual (Page 27)

AM4022 uEFI BIOS Main Setup
ID 1052-1333, Rev. 1.0 Page 21
2.7.2.2.1 Serial Port Out-of-Band Management Console Redirection Settings
2.7.2.2.1.1 Out-of-Band Mgmt Port
This is a display-only function providing information about the serial port used for the Out-of-
Band Management.
2.7.2.2.1.2 Terminal Type
Default setting: VT-UTF8
2.7.2.2.1.3 Bits per second
Default setting: 115200
2.7.2.2.1.4 Flow Control
Default setting: None
2.7.2.2.1.5 Data Bits
This is a display-only function providing information about the frame width for the Out-of-Band
Management.
2.7.2.2.1.6 Parity
This is a display-only function providing information about the parity for Out-of-Band Manage-
ment.
2.7.2.2.1.7 Stop Bits
This is a display-only function providing information about the number of stop bits for Out-of-
Band Management.
SETTING DESCRIPTION
VT100 Use one of these settings to select the terminal type to be emulated.
VT100+
VT-UTF8
ANSI
SETTING DESCRIPTION
9600 Use one of these settings to select the baud rate of the serial port.
19200
57600
115200
SETTING DESCRIPTION
None Use one of these settings to specify the type of flow control to be used for this serial port.
Hardware RTS/CTS
Software Xon/Xoff