Am4022 uefi bios the uefi shell – Kontron AM4022 uEFI BIOS User Manual
Page 51
AM4022 uEFI BIOS
The uEFI Shell
ID 1052-1333, Rev. 1.0
Page 45
USAGE:
Command: kboardconfig <option> <parameter>
Set option “Pxe” to parameter “all”:
COMMAND / RESPONSE:
Shell> kboardconfig Pxe all
The response for “kboardconfig” with <option> and <parameter> is the
display of a status line indicating the performance status of the command
and one or more lines providing further information related to the
command performance.
OPTIONS:
The listing below provides an overview of the possible options and a
short description of their functionality.
To view all of the possible parameters for a given option, use the
command “kboardconfig <option>”.
OPTION
DESCRIPTION
Pxe
Used to select a PXE boot device
Parameters front_a and front_b correspond
to GbE C and GbE D on the front panel
StorageOprom
Used to launch the Storage PCI OPROM
When disabled it includes the onboard RAID option
ROM
PrimaryDisplay
Used to select the primary display device
SataMode
Used to select the operational configuration for the
SATA controller
ide: SATA ports operate as two IDE controllers
ahci: SATA ports operate as one 6-port AHCI
controller
raid: SATA ports form a RAID device
Note: For this command to take effect, the system
must be re-booted. During the bootup, it is possible
to select a menu to specify the desired RAID
configuration. Entry to this menu is achieved by
pressing “Ctrl + I” when requested during the
bootup.
kboardconfig (continued)