Kontron AM4022 uEFI BIOS - Manual (Page 61)

AM4022 uEFI BIOS The uEFI Shell
ID 1052-1333, Rev. 1.0 Page 55
6.2.8 kipmi uEFI Shell Command
kipmi
FUNCTION: Read or configure available MMC parameters from the uEFI shell
SYNTAX:
kipmi [-?] [-b] [<option>[ <parameter>]]
where:
-? show online help (for kipmi or kipmi + option)
-b display output page by page
OPTIONS
fru display fru data
info show information about the device and firmware
ipmb ipmb bus settings
irq get / set KCS IRQ
mode set ipmi controller mode
(do not use, the AM4022 supports only “smc”)
net display and change SOL network settings
sel handle system event log
(do not use, the AM4022 does not support a sys-
tem event log)
sensor shows sensor related information
raw execute raw ipmi command
rawsendmessage execute rawSendMessage ipmi cmd
PARAMETERS
Most of the above options have their own unique
set of parameters. Use the online help (“-?”) for
more information concerning the available
parameters.
DESCRIPTION: The kipmi command provides the capability to execute a comprehensive
set of ipmi functions from the uEFI shell using the KCS interface.
USAGE: Display fru data:
COMMAND / RESPONSE:
Shell> kipmi fru 0
“kipmi fru” alone returns parameter info or status
Display ipmb bus settings:
COMMAND / RESPONSE:
Shell> kipmi ipmb
“kipmi ipmb” alone returns help on available parameters