Kontron AM4022 uEFI BIOS - Manual (Page 42)

Save & Exit AM4022 uEFI BIOS
Page 36 ID 1052-1333, Rev. 1.0
5.3 Save Changes and Reset
This function is used to save all changes made within the Setup to flash. This function performs
a reboot afterwards.
Note: The Setup will ask for confirmation prior to executing this command.
5.4 Discard Changes and Reset
This function is used to discard all changes made within the Setup. This function performs a
reboot afterwards.
Note: The Setup will ask for confirmation prior to executing this command.
5.5 Save Changes (Save Options)
This function is used to save all changes made within the Setup to flash. This function returns
to Setup.
Note: The Setup will ask for confirmation prior to executing this command.
5.6 Discard Changes (Save Options)
This function is used to discard all changes made within the Setup. This function returns to Set-
up.
Note: The Setup will ask for confirmation prior to executing this command.
5.7 Restore Defaults (Save Options)
This function is used to restore all tokens to factory default.
Note: The Setup will ask for confirmation prior to executing this command.
5.8 Save as User Defaults (Save Options)
This function is used to save all current settings as user default. The current setup state can
later be restored using Restore User Defaults.
Note: The Setup will ask for confirmation prior to executing this command.
5.9 Restore User Defaults (Save Options)
This function is used to restore all tokens to settings previously stored by Save as User De-
faults.
Note: The Setup will ask for confirmation prior to executing this command.
5.10 Boot Override
This group of functions includes a list of tokens, each of them corresponding to one device with-
in the boot order. Select a drive to immediately boot that device regardless of the current boot
order. If booting to EFI Shell this way, an exit from the shell returns to Setup.