Kontron AM4022 uEFI BIOS - Manual (Page 31)

AM4022 uEFI BIOS Boot Setup
ID 1052-1333, Rev. 1.0 Page 25
3. Boot Setup
Select the Boot tab to enter the Boot Setup screen. This screen lists the sub-screens for boot
configuration and boot device priority.
3.1 Boot Configuration
3.1.1 Setup Prompt Timeout
This integer function is used to set an additional time the POST should wait for the operator to
press the key to enter SETUP. The time is entered in seconds.
Default setting: 2
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Boot Security Save & Exit
Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Disabled]
Fast Boot [Disabled]
CSM16 Module Version 07.68
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Enabled]
CSM Support [Enabled]
Boot Option Priorities
Boot Option #1 [UEFI: Built-in EFI...]
Boot Option #2 [P0: TOSHIBA MK1676...]
Hard Drive BBS Priorities
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SETTING DESCRIPTION
1
...
65535
Use one of these settings to specify the setup prompt timeout.