Kontron AM4024e User Manual
Page 18
D R A F T — F O R I N
T E R N A L U S E O N L Y
18
www.kontron.com
User Guide
AM4024(E)
Swi
tc
he
s
DIP Switch
One DIP switch, SW2, for board configuration
Hot Swap
One Hot Swap switch
Co
nnect
or
s
Front Panel Connectors
One Serial port (COMA) with RS-232 signal level on a 5-pin micro-AB USB connector, J11
One 20-pin mini DisplayPort connector, J5
Two Gigabit Ethernet ports on RJ-45 connectors with integrated magnetics, J3 and J4
One USB 2.0 port on a 5-pin, mini USB type A connector, J2
Onboard Connector
One extension connector, J7, for either a Serial ATA Flash module or an RTC Backup
Battery module
AMC Card-edge Connector One 170-pin AMC Card-edge connector
LEDs
Module Management LEDs
» LED1 (red):
Out-of-Service LED
» LED2 (red/green/amber):
Health LED
» HS LED (blue):
Hot swap LED
User-Specific LEDs
» ULED3 (red/green):
AMC port 0 Ethernet link status,
(green) + POST code
» ULED2 (red/green):
AMC port 1 Ethernet link status,
(green) + POST code
» ULED1 (red/green):
SATA channels active (green) + POST code
» ULED0 (red/green):
POST code
Ethernet LEDs
» Act (green):
Network Link / Activity
» Speed (green/yellow):
Network speed
Ti
m
er
Watchdog Timer
Software-configurable, two-stage Watchdog with programmable timeout ranging
from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
System Timer
The Intel® QM87 Chipset contains three 8254-style counters which have fixed uses
In addition to the three 8254-style counters, the Intel® QM87 Chipset includes
eight individual high-precision event timers that may be used by the operating
system. They are implemented as a single counter each with its own comparator
and value register.
Sy
s. M
anag
ement
Thermal Management
CPU and board overtemperature protection is provided by:
» Temperature sensors integrated in the 4
th
gen. Intel® Core™ i7/i5 processor:
» Up to four digital thermal sensors for monitoring the processor cores, one
sensor for each core
» One digital thermal sensor for monitoring the graphics core
» One digital thermal sensor for monitoring the package die temperature
» One onboard air temperature sensor for monitoring the board temperature
» Specially designed heat sink
Table 2: AM4024(E) Main Specifications (Continued)
FEATURES
SPECIFICATIONS