Kontron COMe-cPV2(v1.0) - Manual (Page 76)

Kontron microETXexpress-PV User’s Guide
www.kontron.com
72
Feature Option Description
the status of auto-detection
of IDE devices
Secondary
IDE Slave
Submenu
Not Detected
While entering setup, BIOS
auto detects the presence of
IDE devices. This displays
the status of auto-detection
of IDE devices
Third IDE
Master Submenu
Not Detected
While entering setup, BIOS
auto detects the presence of
IDE devices. This displays
the status of auto-detection
of IDE devices
Third IDE
Slave Submenu
Not Detected
While entering setup, BIOS
auto detects the presence of
IDE devices. This displays
the status of auto-detection
of IDE devices
Fourth IDE
Master Submenu
Not Detected
While entering setup, BIOS
auto detects the presence of
IDE devices. This displays
the status of auto-detection
of IDE devices
Fourth IDE
Slave Submenu
Not Detected
While entering setup, BIOS
auto detects the presence of
IDE devices. This displays
the status of auto-detection
of IDE devices
Hard Disk
Write Protect
Disabled
Enabled
Disable/Enable device write
protection.
(This is effective only when
the device is accessed
through the BIOS)
IDE Detect
Time Out (Sec)
0
5
10
15
20
25
30
35
Selects the maximum time out
value for detecting ATA/ATAPI
device(s)
ATA(PI) 80Pin
Cable
Detection
Host &
Device
Host
Device
Mechanism selection of the
80-pin ATA cable detection