Kontron KISS 1U PCI 762 - Manual (Page 16)

7. Product Description KISS 1U_SBC_762 – User's Guide (Version 1.00)
7.1. Front Side
The KISS 1U platform is available as a rackmount version.
The front access panel (Fig. 7, pos. 4) provides protection against unauthorized access to the front-accessible drives, the
filter mat holders and the power button of your KISS 1U platform. The front access panel can be screwed on and off by the
knurled screws. During standard operation, the front access panel should be closed and the knurled screws should be
tightened.
The power button, the power LED, the hard disk activity LED, 4x USB2.0 interfaces, 1x LAN interface, a 3.5" and a 5.25"
slim drive bay are located behind the front access panel (Fig. 7, pos. 4).
If USB devices are connected to the USB ports on the front of the device, the front access panel can not
be closed and locked.
2 3
4 4
1
1
Fig. 7: Front (rackmount version) with the front access panel closed
1 19" bracket with handle
2 Ventilation grille on the front access panel
3 Light diffusors for HDD and power LEDs
4 Front access panel with captive knurled screws
2 5 8
3 6 9
10 7
4
1 1
9
Fig. 8: Front side (desktop version) with opened front access panel
1 Stop bracket with tapped hole for fixing the front
access panel
2 D1: front-accessible 5.25" slim dive bay (shown
with a slim DVD drive installed)
3 D2: front-accessible 3.5" drive bay (with blanking
cover)
4 2x USB 2.0 (from the SBC)
5 2x USB 2.0 (from the backplane)
6 1x LAN interface
7 Power button
8 Indicators (power LED and hard disk LED)
9 2x Filter mat holder with knurled screw (behind
each filter mat holder and filter mat, is located the
fan slide-in module)
10 Chassis front panel
14 www.kontron.com