Kontron KISS 1U PCI 762 - Manual (Page 24)

7. Product Description KISS 1U_SBC_762 – User's Guide (Version 1.00)
7.5. Fan Slide-in Modules
The four front fans of the system are firmly mounted in user friendly, exchangeable fan slide-in modules (hot swap). Thus,
a reliable air circulation for an optimal, active cooling of the system is provided. Each fan slide-in module is installed in a
fan compartment on the front side of the system.
1 1
3
2
3
4
Fig. 23: Exchangeable fan slide-in modules with captive knurled screws
1 Captive knurled screws for fixing the fan slide-in
modules in the corresponding fan compartment
2 Cables and connectors for the voltage supply of the
fans
3 Two fans per fan slide-in module
4 Fan compartment on the front side of the KISS 1U
platform
KISS 1U must only be operated with functioning system fans (fan slide-in modules)!
Refer to the subsection 10.1 “Replacing the System Fans”.
Faulty components should only be replaced with original Kontron spare parts.
Fan slide-in module assembled, Part No.: 1017-2548
22 www.kontron.com