Kontron KISS 2U KTQ87 User Manual
Page 28
7. Product Description
KISS 2U V2_MB_SBC – User's Guide (Version 1.00)
Please observe that the KISS 2U V2 platform is designed to be operated in horizontal position only.
10
1
2
3
8
7
5
4
5
9
6
Fig. 23: Example of KISS 2U V2 - Configuration with motherboard (shown as config. for low-profile expansion cards)
1 Cover retaining plate on the front side
2
L1 and L2: drives bays (stacked one above the
other into a drive cage)
3 Power Supply Unit (PSU)
4 Cover retaining plates on the rear side
5 Centring latches for the cover at the rear side
6 Fastening screws for the slot brackets or expansion
card slot brackets
7 Card hold down bracket (adjustable for long or short
expansion cards; see Fig. 20, pos. 3)
8 Motherboard
9 Fans (of the fan slide-in-module)
10 Fan slide-in-module with two fans
26
www.kontron.com