Fig. 33:rear view of the fan slide-in module, Fig. 35: side view of the fan slide-in module – Kontron KISS 2U KTQ87 User Manual

Page 39

Advertising
background image

10. Maintenance and Prevention

KISS 2U V2 MB_SBC– User's Guide (Version 1.00)

1

2

1

3

4

Fig. 32: Fan slide-in module without filtermat holder

Fig. 33:Rear view of the fan slide-in module

Fig. 34: Fan slide-in module with mounted filter mat holder

Fig. 35: Side view of the fan slide-in module

Legend for Fig. 32 and Fig. 33:

1 Fan slide-in module with two knurled screws

3 Socket for fan power supply and control

2 Bolt with tapped hole for mounting the filter mat

holder

4 2x fans (temperature controlled

independently from each other)

5.

Replace the fan slide-in module with a new functional module.

6.

Insert the retained filter mat holder (with filter mat) to the front side of the fan slide-in module as described in the
section 10.2 “Cleaning the Filter Mat” (step 7 and step 8).

7.

Slide the fan slide-in module with mounted filter mat holder (Fig. 34) into the fan compartment (Fig. 31, pos. 4).

8.

Push the fan slide-in module into the fan compartment until the fan control connector (Fig. 33, pos. 2) is firmly
inserted into the socket (Fig. 31, pos. 3).

9.

Fasten the knurled screws of the fan slide-in module (Fig. 30, pos. 1)

www.kontron.com

37

Advertising