Kontron KISS 2U KTQ87 - Manual (Page 44)

12. Technical Data KISS 2U V2_MB_SBC – User's Guide (Version 1.00)
12.
Technical Data
KISS 2U V2-xxxxxxxx-y
Installed CPU Card * Refer to „KISS 2U V2 System - Configuration Guide“
Controls and Indicators
(at the front side) Power button
Power LED (green)
HDD LED (orange)
Operating Elements
(at the rear side) 1x ON/OFF switch of the PSU: for system configuration with
AC wide range PSU (it doesn’t disconnect the unit from the mains)
Interfaces
(at the front side) 2x USB (2.0)
Interfaces
(at the rear side) I/O of the installed CPU card (motherboard/SBC)
* refer to the manual of the installed CPU card (motherboard/SBC)
Drive Bays Up to two drive bays
* optionally equipped (depending on the system configuration
ordered (refer to „KISS 2U V2 System - Configuration Guides“)
Free Expansion Slots * optionally equipped (depending on the system configuration
ordered (refer to „KISS 2U V2 System - Configuration Guides“)
Lithium Batterie * refer to the manual of the installed CPU card (motherboard/SBC)
Equipped Power Supply Unit •AC Wide Range 100-240V
Rated Voltage Range See type label
KISS 2U V2 = System type
The “ xxxxxxxxx” group is replaced by up to a max. 8-digit combination of numbers, letter or space, and
represents the installed CPU board
The “ y” is replaced by a single letter (A through Z) representing the power supply installed into the
system.
The corresponding “KISS 2U V2 System - Configuration Guides” and the manual of the installed CPU card
can be downloaded from our web site at
www.kontron.com by selecting the product name.
42 www.kontron.com