Kontron M2M Smart Services Developer Kit User Manual User Manual
Page 21
21
Begin to insert the SIM card in the SIM card slot on the top of the M2M System as shown in Figure 16.
Figure 16. Beginning to insert SIM card in the M2M System
Figure 17 shows the SIM card half inserted. Gently push the SIM card into the M2M System so the contacts on the
card are fully inserted. To remove the SIM card gently push down on the card and it will uninstall.
Figure 17. SIM card in half inserted in the M2M System
Installing a MicroSD card
Additional data storage is possible by dropping in a microSD card with storage capacity of up to 4GB in the slot on
the side of the system.
Installing a Headphone
A headphone may be connected using the 3.5mm headphone jack provided. Use the correct connector size for the
slot provided.