Kontron CG2200 Carrier Grade Server - Manual (Page 28)

21
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Loosen the two blue captive retention screws (
3. Figure 11, “A”) at the front of the riser assembly and the blue captive screw at the rear of the chassis
(“B”).
4. Using the two blue touch points (“C”), lift the riser card assembly out of the chassis (“D”).
Figure 11. Removing the Riser Card Assemblies
3.2.6 Re-Installing a Riser Card Assembly
To re-install the riser card assembly:
1. Position the riser front tabs over the holes on the PCI support cross bar. (Figure 11, “A”).