Kontron CG2200 Carrier Grade Server - Manual (Page 59)

52
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
2. Remove the chassis cover. For instructions see “Removing the Chassis Cover”.
3. Remove the left-side, slot 2 riser card assembly. For instructions see “Removing a Riser Card
Assembly”.
Remove the plastic filler panel from the rear panel of the chassis by squeezing the side edges and pulling
the panel out. (Figure 37, “A”)
Figure 37. Removing the RMM4 Port Filler Panel
4. Install the small RMM4 key card on the server board. (Figure 41)
5. Attach the bracket to the bottom of the module with the two larger screws in the package. (Figure 38)
Figure 38. Fastening the RMM4 Board to the Bracket