Kontron CP307-V BIOS - Manual (Page 16)

Starting BIOS Setup CP307/CP307-V BIOS Guide
Page 6 ID 35978, Rev. 2.0
P R E L I M I N A R Y
Note: If the CP307/CP307-V is connected to a terminal, the <F8>, <F9> and <F10> keys
cannot be used via the serial port.
HOT KEY DESCRIPTION
F1 The <F1> key is used to display the General Help screen.
Press the <F1> key to open the General Help screen.
F10 The <F10> key is used to save any changes you have made and exit CP307/CP307-V Setup.
Press the <F10> key to save your changes. The following screen will appear:
Press the <Enter> key to save the configuration and exit. To abort this function and return to
the previous screen, use the <Arrow> key to select Cancel and then press the <Enter> key.
ESC The <Esc> key is used to discard any changes you have made and exit the CP307/CP307-V
Setup. Press the <Esc> key to exit the CP307/CP307-V setup without saving the changes. The
following screen will appear:
Press the <Enter> key to discard changes and exit. To abort this function and return to the pre-
vious screen, use the <Arrow> key to select Cancel and then press the <Enter> key.
Enter The <Enter> key is used to display or change the function setting listed for a particular setup
item. The <Enter> key can also be used to display the setup sub-screens.