Kontron CP307-V BIOS - Manual (Page 44)

Advanced Setup CP307/CP307-V BIOS Guide
Page 34 ID 35978, Rev. 2.0
P R E L I M I N A R Y
Hard Disk Power Down Mode
This function is used to select the state of the hard disk devices if APM power save is requested
by the OS.
Optimal default setting: Suspend
Fail-Safe default setting: Disabled
Suspend Timeout (Minute)
This function specifies the length of time the system waits before it enters suspend mode.
Optimal and Fail-Safe default settings: Disabled
Throttle Slow Clock Ratio
This function is used to select the CPU duty cycle if the system is put into throttling mode via
APM.
Optimal and Fail-Safe default settings: 50.0 %
SETTING DESCRIPTION
Disabled Use this setting to inhibit the state change of the hard disk devices.
Suspend Use this setting to allow the state change of the hard disk devices.
SETTING DESCRIPTION
Disabled Use this setting to prevent the system from entering suspend mode.
1 Min
2 Min
4 Min
8 Min
10 Min
20 Min
30 Min
40 Min
50 Min
60 Min
Use one of these settings to specify the computer system’s supspend timeout.
SETTING DESCRIPTION
87.5 %
75.0 %
62.5 %
50.0 %
37.5 %
25.0 %
12.5 % Use one of these setting to specify the CPU duty cycle if the system is put into throttling
mode via APM