Kontron CP307-V BIOS - Manual (Page 52)

Advanced Setup CP307/CP307-V BIOS Guide
Page 42 ID 35978, Rev. 2.0
P R E L I M I N A R Y
REMOTE ACCESS CONFIGURATION SCREEN
This screen provides functions for specifying remote access configuration settings.
Remote Access SDO
This function is used to enable the BIOS remote access feature.
Optimal and Fail-Safe default settings: Disabled
Serial Port Number SDO
This function is used to select the serial port for console redirection.
Note: This function is only available when the Remote Access function is set to Enabled.
Optimal and Fail-Safe default settings: COM1
SETTING DESCRIPTION
Disabled Use this setting to prevent the BIOS from using Remote Access.
Enabled Use this setting to allow the system to use the remote access feature. The remote access
feature requires a dedicated serial port connection.
SETTING DESCRIPTION
COM1 Use this setting to select COM1 (Communication port 1) as the remote access interface.
COM2 Use this setting to select COM2 (Communication port 2) for the remote access interface.