Kontron CP307-V BIOS - Manual (Page 45)

CP307/CP307-V BIOS Guide Advanced Setup
ID 35978, Rev. 2.0 Page 35
P R E L I M I N A R Y
Keyboard and PS/2 Mouse
This function is used to specify whether the keyboard and the PS/2 mouse actions reset the
APM standby timers.
Optimal and Fail-Safe default settings: MONITOR
Advanced Resume Event Controls
The following functions are currently not supported on the CP307/CP307-V.
Resume on Ring
This function is used to enable wake from sleep state upon serial RI# event.
Optimal and Fail-Safe default settings: Disabled
Resume on PME#
This function is used to enable Power Management Event (PME) wake from sleep states.
Optimal and Fail-Safe default settings: Disabled
Resume on LAN
This function is used to enable Resume on RoL magic package.
Optimal and Fail-Safe default settings: Disabled
Resume on RTC Alarm
This function is used to set a specific time for the system to resume.
Optimal and Fail-Safe default settings: Disabled
SETTING DESCRIPTION
MONITOR Use this setting to monitor the keyboard and PS/2 actions.
IGNORE Use this setting ignore the keyboard and PS/2 actions.
SETTING DESCRIPTION
Disabled Use this setting to prevent wake from sleep state upon RI# event.
Enabled Use this setting to allow wake from sleep state upon RI# event.
SETTING DESCRIPTION
Disabled Use this setting to prevent PME wake from sleep states.
Enabled Use this setting to allow PME wake from sleep states.
SETTING DESCRIPTION
Disabled Use this setting to prevent Resume on RoL magic package.
Enabled Use this setting to allow Resume on RoL magic package.
SETTING DESCRIPTION
Disabled Use this setting to prevent the system from resuming on RTC alarm.
Enabled Use this setting to specify a time for the system to resume on RTC alarm.