Mercedes-Benz E-Cab 2013 Owners Manual - Manual (Page 145)

3-zone automatic climate control
X Turn the SmartKey to position 2 in the
ignition lock.
X Press switch I up or down repeatedly until
the desired symbol appears in the display
(
Y page 139).
Setting the airflow
Climate control
X Turn the SmartKey to position 2 in the
ignition lock.
X To increase/reduce: press switch G up
or down (
Y page 137).
3-zone automatic climate control
X Turn the SmartKey to position 2 in the
ignition lock.
X To increase/reduce: press switch H up
or down (
Y page 139).
Switching the ZONE function on/off
X To activate: press the á button.
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side
and the rear compartment.
X To deactivate: press the á button.
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side and
the rear compartment.
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
Switch off the "defrosting" function as soon
as the windshield is clear again.
X Turn the SmartKey to position 2 in the
ignition lock.
X To activate: press the ¬ button.
The indicator lamp above the ¬ button
lights up.
The climate control system switches to the
following functions:
R heating with dehumidification on
R high airflow (depending on the outside
temperature)
R
high temperature (depending on the
outside temperature)
R air distribution to the windshield and
front side windows
R
air-recirculation mode off
X To deactivate: press the ¬ button.
The indicator lamp above the ¬ button
goes out. The previously selected settings
are restored. The heating with air
dehumidification function remains on. Air-
recirculation mode remains deactivated.
or
X Press the à button.
The indicator lamp above the ¬ button
goes out. Airflow and air distribution are set
to automatic mode.
or
X Automatic climate control: press
temperature button E or H up or down
(
Y page 137).
Automatic climate control: press
temperature button F or J up or down
(
Y page 139).
Operating the climate control systems
143
Climate control
Z