Hold function, Driving and parking, Driving systems – Mercedes-Benz E-Cab 2013 Owners Manual User Manual

Page 191

Advertising
background image

HOLD function

General notes

The HOLD function can assist the driver in the
following situations:

R

when pulling away, especially on steep
slopes

R

when maneuvering on steep slopes

R

when waiting in traffic

The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.

Activation conditions

You can activate the HOLD function if:

R

the vehicle is stationary.

R

the engine is running or if it has been
automatically switched off by the ECO
start/stop function.

R

the driver's door is closed or your seat belt
is fastened.

R

the parking brake is released.

R

the hood is closed.

R

the transmission is in position

D, R or N.

R

DISTRONIC PLUS is deactivated.

Activating the HOLD function

G

WARNING

The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).

X

Make sure that the activation conditions
are met.

X

Depress the brake pedal.

X

Quickly depress the brake pedal further
until ë appears in the multifunction
display.
The HOLD function is activated. You can
release the brake pedal.

i

If depressing the brake pedal the first

time does not activate the HOLD function,
wait briefly and then try again.

Deactivating the HOLD function

G

WARNING

Never get out of the vehicle when the HOLD
function is activated.
The HOLD function must never be operated
or deactivated by a passenger or from outside
the vehicle.
The HOLD function does not replace the
parking brake and must not be used for
parking.
The braking effect of the HOLD function is
canceled and the vehicle could roll away if:

R

the HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal.

R

there is a malfunction in the system or an
interruption in the power supply, e.g.
battery failure.

R

the electrical system in the engine
compartment, the battery or the fuses are
tampered with.

R

the battery is disconnected.

If you leave the vehicle or park it, deactivate
the HOLD function and secure the vehicle
against rolling away.

The HOLD function is deactivated
automatically if:

R

you accelerate and the transmission is in
position

D or R.

R

you shift the transmission to position

P.

Driving systems

189

Driving and parking

Z

Advertising
This manual is related to the following products: