Mercedes-Benz E-Cab 2013 Owners Manual - Manual (Page 224)

Deactivating/activating ESP ®
G WARNING
If you deactivate ESP ® , ESP ® no longer
stabilizes the vehicle. There is an increased
risk of skidding and an accident.
Only deactivate ESP
® in the situations
described in the following.
For further information about ESP ® , see
( Y page 66).
X Start the engine.
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press 9 or : to select ESP .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
ESP ® is deactivated if the å warning lamp
in the instrument cluster lights up
continuously when the engine is running.
If the ä warning lamp and the å
warning lamp are lit continuously, ESP
® is not
available due to a malfunction.
It may be best to deactivate ESP
® in the
following situations:
R
when using snow chains
R
in deep snow
R
on sand or gravel
Observe the information on warning lamps
(
Y page 259).
Observe the information on display messages
(
Y page 229).
Activating/deactivating PRE-SAFE ®
Brake
PRE-SAFE ® Brake is only available in vehicles
with DISTRONIC PLUS.
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press the 9 or : button to select
PRE-SAFE Brake .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When PRE-SAFE ® Brake is activated, the
multifunction display shows the Ä symbol
as long as the HOLD function is not activated
(
Y page 189).
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed under 22 mph (35km/h) the j
symbol for Parking Guidance is displayed
instead of the Ä symbol (
Y page 194)
If the PRE-SAFE Brake: Sensors
Deactivated message appears, the radar
sensor system is deactivated.
X Switch on the radar sensor system
(
Y page 226).
For more information on PRE-SAFE ® Brake,
see ( Y page 67).
Activating/deactivating ATTENTION
ASSIST
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press 9 or : to select Attention
Assist .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When ATTENTION ASSIST is activated, the
À symbol appears in the multifunction
display when the ignition is on.
222
Menus and submenus
On-board computer and displays