Engine oil, Technical data, Service products and filling capacities – Mercedes-Benz E-Cab 2013 Owners Manual User Manual

Page 367

Advertising
background image

Engine oil

General notes
!

Never use engine oil or an oil filter of a

specification other than is necessary to
fulfill the prescribed service intervals. Do
not change the engine oil or oil filter in
order to achieve longer replacement
intervals than those prescribed. You could
otherwise cause engine damage or damage
to the exhaust gas aftertreatment.
Follow the instructions in the service
interval display regarding the oil change.
Otherwise, you may damage the engine and
the exhaust gas aftertreatment.

The engine oils are matched to the
performance of Mercedes-Benz engines and
service intervals. You should therefore only
use engine oils and oil filters that are
approved for vehicles with maintenance
systems.
For a list of approved engine oils and oil filters,
consult an authorized Mercedes-Benz
Center. Or visit the website
http://bevo.mercedes-benz.com.
The table shows which engine oils have been
approved for your vehicle.

Model

Engine

model

MB

Approval

E 350

BlueEFFICIENCY
E 350 4MATIC

BlueEFFICIENCY

276

229.5

E 550

BlueEFFICIENCY

278

229.5

i

MB approval is indicated on the oil

containers.

Filling capacities

The following values refer to an oil change
including the oil filter.

Model

Capacity

E 350

BlueEFFICIENCY
E 350 4MATIC

BlueEFFICIENCY

6.9 US qt (6.5 l)

E 550

BlueEFFICIENCY

9.0 US qt (8.5 l)

Additives
!

Do not use any additives in the engine oil.

This could damage the engine.

Engine oil viscosity

Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an SAE (viscosity)
classification suitable for the prevailing
outside temperatures. The table shows you
which SAE classifications are to be used. The
low-temperature characteristics of engine
oils can deteriorate significantly, e.g. as a
result of aging, soot and fuel deposits. It is
therefore strongly recommended that you
carry out regular oil changes using an
approved engine oil with the appropriate SAE
classification.

Service products and filling capacities

365

Technical data

Z

Advertising
This manual is related to the following products: